JetPAC Hybrid Injector
Item Number: J001
with Jet Flask
Full Dentures, Flexibles, Flippers, Metal, Metal-Free, and Partials
The affordable, most innovative denture system
Free to inject a new case every 45 sec, without limit
Operates via compressed air
Simple lever operation
Size (W x D x H)
11.81 x 10.63 x 24.02 in
300 x 270 x 610 mm
68lb / 31 kg
90 - 100 PSI
Compressed Air Inlet
Recommended: 90 lb Air Tank
of Air Flow
Connect the airline hoses and components as shown in the picture above.
Make sure to connect the “compressor plug” into the “air compressor hose” last.
Push the blue ring to the open connector to insert the hose.
Mount the moisture filter to the wall or side of JetPAC Hybrid.
How to Operate
Once the air tank is connected, push the air pressure cap up and turn it clockwise to set the pressure at 0.7MPa (7 bar, 90~100PSI).
Up & turn to set 7 bar
Push down after adjustment
To switch between flexible thermoplastic and heat-cure acrylic injection, flip black switch between “Inject” and “Pack” respectively.